Fixture Plates:

Acrylic (1/4-20 tapped holes for Te-Co fixture components)

Provided with magnets on the sides to hold in position when used with our Precision Square.

8" x 6" x 1/2" Thick

12" x 12" x 1/2" Thick

Plates are alpha numerically labeled for documentation of your fixture setups for increased efficiency in future part inspection.

Custom Sizes Available!

Precision Steel Squares:

Flat Black Non Glare Finish

Allows established 0, 0, point for all Automated Programs

Quick alignment of part for manual measurement

Use to hold Acrylic Fixture Plates in place.

8" x 6" x 1/2" Thick

12" x 12" x 1/2" Thick

Custom Sizes Available!

Special Custom Cavity Fixtures:

Supplied with Magnets that when used with our Precision Squares will hold the Fixtures in place. 

Ideal for repeat measurements of parts or when utilizing a program.

2 Cavity Fixture

4 Cavity Fixture

9 Cavity Fixture

Custom Sizes Available!

TE-CO Fixture Kits:

Basic Kit

(43 Pieces)

The Basic kit is designed for clamping non-magnetic parts. Use with plastic, aluminum and steel.

Contents Include:

Clamps:

3 qty Small Soft Touch Clamps

3 qty Large Soft Touch Clamps

Positioner:

2 qty Large Adjustable Positioner

1 qty Delrin Height Adjuster

Cones:

3 qty Delrin Cones

Pin Rests:

3 qty 1/2" Dia. x 1/2"

3 qty 3/4" Dia. x 1/2"

Standoffs:

3 qty 1/2" Dia. x 3/4"

6 qty 1/2" Dia. x 1"

3 qty 1/2" Dia. x 2 "

3 qty 3/4" Dia. x 3/4"

6 qty 3/4" Dia. x 1"

3 qty 3/4" Dia. x 2"

1 qty Wooden Component Holder

All have 1/4-20 threads and are made to be used in conjunction with a fixture plate (Sold Separately) with 1/4-20 holes.

Comprehensive Kit

(63 Pieces)

The comprehensive kit has all the components that are in the Basic Kit plus:

Standoffs: (all are 1" diameter)

3 qty 3/4", 2"

6 qty 1"

Clamps and Rods:

2 qty Swivel joint rest

2 qty Small toggle clamp with Pad

Locating Accessories:

1 qty 1/2" Dia. Jack screw (Height Ranges from 1.45" - 1.75")

3 additional cones

1 qty Wooden Component Holder

Note: All have 1/4-20 threads and are made to be used in conjunction with a fixture plate (Sold Separately) with 1/4-20 holes.

Magnetic Component Pack

(17 Pieces)

Magnets optimize access for probing of steel parts

Contents Include:

Rest Pads:

3 qty 1/2" Dia. x 1"

3 qty 3/4" Dia. x 1"

Pin Rests:

3 qty 1/2" Dia. x 1"

3 qty 3/4" Dia. x 1"

Standoffs:

2 qty 1/2" Dia. x 1" V Standoff

2 qty 1" Dia. x 1" V Standoff

1 qty Wooden Component Holder

Note: All have 1/4-20 threads and are made to be used in conjunction with a fixture plate (Sold Separately) with 1/4-20 holes.

Other TE-CO Accessories:

It may be necessary to add on to your kit with other components such as our 3" height standoffs available in 1/2", 3/4", and 1" diameters.

Other fixturing components as pictured.

Magnetic V-Block

Cap Screw for use with Magnetic V-Block

Knurled Knob for use with Adjustable Positioner

Adjustable Ball Positioner for holding parts at an angle. Pivots 45º in all directions. Tightens to selected angle. Top has a 1/4-20 tapped hole.

Large Toggle Clamp with Pad. Holds parts for probing. Base adjusts for placement. Includes knurled knob stud to lock in place.

Spring Stop with Pad. Provides Horizontal clamping. T-Handle allows for quick changeover. Base adjusts for placement. Includes knurled knob stud to lock in place.

Thread Adapter converts between 1/4-20 & 5/16-18.

Toggle Pad. Swivels 10º from vertical in all directions. Assures positive gripping.