DESCRIPTION |
DESCRIPTION |
HARD GAGE CALIBRATION |
HAND GAGES / INSTRUMENTS |
| 1-2-3 BLOCKS / 2-4-6 BLOCKS |
BENCH MICS / SETTINH FIXTURES |
| ALIGNMENT PLUGS |
BORE GAGES (3 point or per probe) |
| ANGLE BLOCKS (per block) |
CALIPERS (Depth, Dial, Digital, Vernier, ID/OD) Range: </=48" |
| ANGLE GAGES (per leaf) |
CHAMFER CHEK GAGES |
| ANGLE PLATES (each) |
DEPTH GAGES - (Dial) |
| ANGLES - GRANITE (Three or Five Sided) |
FILM THICKNESS GAGES - (Analog) |
| BALLS - CALIBRATION |
FILM THICKNESS GAGES - (Ultrasonic) |
| COMBINATION SQUARES |
HEIGHT GAGES (Dial, Digital, Vernier, Point) Range: </-24" |
| DEPTH MIKEMASTER (each step) |
HEIGHT RISER |
| FEELER GAGES (each) |
HOLTEST GAGES |
| GAGE BLOCKS Range:</= 6 " |
INDICATOR / BORE CALIBRATOR |
| GEAR WIRES (Per Wire) |
INDICATORS (Dial, Digital, Test) |
| HEIGHT SET MASTERS - Range: </= 24 " |
INDICATORS (Co-Axial) |
| KALMASTERS (per step) |
MICROMETERS - Depth (for Mic Head) |
| LENGTH STANDARDS Range:</= 11" |
MICROMETERS - Inside per set
Range: </= 24" |
| LEVELS |
MICROMETERS - Outside (Multi-Anvils)
Range: </= 36" |
| MASTER DISCS (Readings at 0° & 90°), Range: </= 12" |
MICROMETERS - Pitch Range: </= 12" |
| MASTER DISCS (Readings at 0° & 90°), Range: </= 12" |
MICROMETERS - Pitch Range: </= 12" |
| MIKE MASTERS (per step) |
POCKET COMPARATORS & RETICLES |
| PARALLELS (each) |
PROFILOMETERS |
| PIN / PLUG GAGES (Class Z, ZZ, Y), Range: </= 8", Discounts on Quantities >500 |
SNAP GAGES - Dial & Fixed |
| PLUG GAGES - Cylindrical (Class XX, XXX) Range: </= 12" |
STOP WATCHES / TIMERS |
| PLUG GAGES - Deltronic (Class X), Range:
</= 1", per member |
SUPERMICROMETERS |
| PROTRACTORS |
ELECTRICAL / ELECTRONIC CALIBRATION |
| RADIUS GAGES (per leaf) |
GLOSS METER |
| REFERENCE/ROUGHNESS/SPECIMENS (Per patch) |
FORCE / WEIGHT / TORQUE / TENSION / DUROMETERS |
| RINGS, CHAMFER CHEK MASTER |
DUROMETERS |
| RINGS - CYLINDRICAL Range: </= 12 " |
DUROMETER SPECIMEN |
| SCALE LUPES (single scale) |
FORCE GAGES Range:</= 500lbs / 250kg |
| SCREW PITCH GAGES (per leaf) |
FORCE GAGES Range:</= 500lbs / 250kg |
| SINE BARS (each) |
TENSILE TESTERS Range:</= 10,000lbs |
| SPACER BLOCKS (price per block) |
SCALES / BALANCES Range:</= 200lbs |
| SPLINE PLUGS & RINGS |
TORQUE TESTERS / TRANSDUCERS Range:</= 600 ft/lbs |
| SQUARES - CYLINDRICAL |
TORQUE WRENCHES Range:</= 200 ft/lbs |
| SQUARES - GRANITE |
TEMPERATURE |
| SQUARES - STEEL Range:</= 24 " |
TEMPERATURE (Ovens, Controllers, Recorders-Single Temp Point) |
| STAGE MICROMETERS |
THERMOCOUPLE CALIBRATORS |
| STEEL RULES Range:</= 96" |
THERMOCOUPLE PROBES |
| STRAIGHT EDGES |
THERMOCOUPLE THERMOMETERS |
| SURFACE PLATES (Certs or Lapping) |
PRESSURE |
| TAPE MEASURES Range:</= 100' |
PRESSURE Range: Up to 10,000 PSI
(Not Oxygen) |
| TAPERED GAGES (Rings & Plugs) |
SURFACE |
| TAPERED THICKNESS GAGES |
SURFACE FINISH |
| TELESCOPE GAGES |
|
| THREAD & SETTING PLUGS (UN Series, Metric) Range: </= 12" |
|
| THREAD & SETTING PLUGS (Non-Standard) Range: >/= 12" |
|
| THREAD WIRES (per wire) |
|
| V-BLOCKS (One or Two Sided) |
|
DESCRIPTION |
DESCRIPTION |
HARD GAGE CALIBRATION |
FORCE / WEIGHT / SPEED / TORQUE / TENSION / DUROMETERS |
| ALIGNMENT PLUGS (each) |
DEADWEIGHT TESTERS (single or dual unit - up to 10 weights each) |
| ANGLE PLATES (each) |
DUROMETERS |
| ANGLES - GRANITE (Three or Five Sided) |
DUROMETER SPECIMEN |
| BALLS - CALIBRATION |
DYNAMOMETER GAGES Range: </= 10,000 lbs |
| COMBINATION SQUARES |
FORCE GAGES Range: >200 - 500 lbs/100-250kg |
| CONCENTRICITY GAGES / JO PLUGS |
LOAD CELLS Range:</= 10,000 lbs |
| CREST CHECK GAGES (RINGS & PLUGS) (each) |
SCALES / BALANCES Range: </= 500lbs |
| DEPTH MASTER (LEITECH) (each) |
STROBOSCOPES |
| DEPTH MIKEMASTER (each step) |
TACHOMETERS |
| GAGE BLOCKS Range:</= 4" |
TENSIOMETERS - CABLE / BELT |
| GEAR WIRES (Per Wire) |
TORQUE METER (TORQUE CHEKS)
Range: 0-300 ft/lb |
| HEIGHT SET MASTERS Range:</= 24" |
TORQUE TESTERS / TRANSDUCERS
Range: </= 2000 ft/lbs |
| KALMASTERS (per step) |
TORQUE WATCH |
| LENGTH STANDARDS Range: </= 78" |
TORQUE WRENCHES Range: </= 2000 ft/lbs |
| LEVELS |
WEIGHTS Range: 5g - 25kg / .01lb - 50lb |
| MASTER DISCS (Readings at 0° & 90°), Range: </= 12" |
FLOW / HUMIDITY / PRESSURE / TEMPERATURE / VACUUM / VELOCITY |
| MICROHITE STANDARDS (each) |
FLOW |
| MIKE MASTERS (per step) |
Air/N2 up to 50 SLM (most standard models) |
| OPTICAL FLATS |
Air/N2 up to 5000 SLM |
| PI TAPES - per reading (linear check) Range:>1" - 8" |
Water |
| PITCH MIC MASTERS |
HUMIDITY |
| PLUG GAGES, CYLINDRICAL (Class XX, XXX) Range:</= 12" per member |
Dial Type (Three Points) |
| SCALE LUPES (single scale) |
Psychrometer |
| SINE BARS (each) |
Chilled Mirror |
SPACER BLOCKS (per block)
Range: </= 96" |
HYGROMETERS |
| STAGE MICROMETERS |
PRESSURE - Range: </= 10,000psi (NOT Oxygen) |
| SURFACE FINISH MASTERS |
Barometer |
| TAPER GAGES (Rings & Plugs) |
Differential Pressure |
| TAPERED THICKNESS GAGES |
Manometer (Analog/Digital) |
| TAPERED THREAD GAGES (BSPT, ISO, JIS) PLUGS Range:</= 6" ea member |
Test & Magnehelic |
| TAPERED THREAD GAGES (BSPT, ISO, JIS) RINGS Range</- 6" ea member |
Pressure Transducer |
| TAPERED THREAD PLUGS & RINGS (NPT,NPTF) Range:</= 6" ea member |
TEMPERATURE (Ovens, Controllers, Recorders-Single Temp Point) |
| THREAD & SETTING PLUGS (UN Series, Metric) Range:</= 12" ea member |
PYROMETERS |
THREAD & SETTING PLUGS (Non-Standard)
Range:</= 12" ea member |
RTD PROBE, COEFFS |
| THREAD & SETTING PLUGS (BSPP, ACME, Buttress, ISO, JIS) Range:</= 12" ea member |
CONTROLLER |
| THREAD RINGS (UN Series)(Non-Standard must have Customer's Set Plug) Range:</= 6" ea member |
TEMP CONTROLLERS |
| THREAD RINGS (UN Series)(w/o Set Plug) (Left Hand & Multi Thread) Range:</= 6" ea member |
TENSILE TESTERS Range: </= 10,000lbs |
| THREAD RINGS (BSPP, ACME, Buttress, ISO, JIS) (w/Cust Set Plug) Range:</= 6" ea mem |
THERMOCOUPLE CALIBRATORS |
| THREAD RINGS (BSPP, ACME, Buttress, ISO, JIS) (w/o Set Plug) Range:</= 6" ea member |
THERMOCOUPLE PROBES |
| THREAD WIRES (per wire) |
THERMOCOUPLE THERMOMETERS |
| ELECTRICAL / ELECTRONIC CALIBRATION |
THERMOMETERS - GLASS |
| ACCELEROMETERS Single or Multiple Axis (each) |
THERMOMETERS - High Accuracy(adjustable) |
| AMMETERS |
THERMOMETERS - ROD (Dial, Digital) |
| ANALOG AMP METERS & OHM |
THERMOMETERS - IR |
| ANALOG POWER METERS |
VACUUM GAGES / TRANSDUCERS |
| ANALOG VOLT METERS |
VIBRATION AMP - 1 Channel (each) |
| BAROMETERS |
VISCOMETERS - </= 2 Paddles (each) |
| BRIDGES |
VELOCITY |
| CAPACITANCE METER |
Vane or Anemometer |
| CLAMP-ON METERS |
HAND GAGES / INSTRUMENTS |
| CONDUCTANCE METERS |
AIR COLUMNS |
| CONDUCTIVITY METERS |
AIR GAGES |
| CRIMPERS |
AMPLIFIERS |
| CURRENT PROBES |
BENCH CENTERS |
| DATA LOGGERS (single/multiple channel) |
BENCH MICS / SETTING FIXTURES |
| DECADE RESISTORS |
BORE GAGES (3 point or per probe) |
| ELECTRIC PERMMETER |
CONTRACERS |
| FREQUENCY COUNTERS |
DIMENSIONAIR |
| FUNCTION GENERATORS (standard or synthesized) |
FILM THICKNESS GAGES - (Analog) |
| GAGE AMPS (W/Customer supplied LVDT) |
FILM THICKNESS GAGES - (Ultrasonic) |
| GLOSS METER |
HEIGHT SET MASTERS - Range:< /=24" |
| HYPOT TESTERS (15kV) |
HOLTEST GAGES |
| LCR METERS |
INDICATOR / BORE CALIBRATOR |
| MEGGERS |
MICROMETERS - PITCH Range: </= 12" |
| MULTIMETERS-DIGITAL (DMM)(<5.5 Digits) |
MIRACLE POINT |
| PANEL METERS |
STOP WATCHES / TIMERS |
| PH METERS |
SUPERMICROMETERS |
| POWER METERS - (single/triple phase) |
TAPE MEASURES - PI (5 Readings) |
| POWER SUPPLIES Range: </= 4 outputs |
FORM / SHAPE / SURFACE |
| REFRACTOMETERS |
ROUNDNESS TESTERS |
| RESISTORS |
CONTOUR / PROFILOMETERS |
| ROUNDNESS TESTERS |
SURFACE FINISH |
| OSCILLOSCOPES (2 Channels) |
|
| SAND RAMMERS / SAND STRENGTH TESTERS |
|
| SCOPEMETERS |
|
| SHUNTS |
|
| SOLDER IRONS / SOLDER POTS |
|
| SOUND LEVEL METERS |
|
| SPRING TESTERS |
|
| SIGNAL GENERATORS Range: </= 100MHz |
|
| STRIP / CHART / X Y RECORDERS (single/multi channel) |
|
| WATT METERS (Up to 11kw) |
|
| Z METERS |
|
| ZAHN CUPS (each) |
|
To see our ISO / IEC 17025:2005 Laboratory Scope of Accreditation please click on the link below:
Online
Store
You have 0
items
in your cart.