Vermont

ATI ISO 17025 Accredited Calibration Services

Assurance Technologies will manage your entire Gage Control Program. All gage history, copies of Calibration Certificate are accessible 24/7 in our Cloud based password protected portal. A-Trax was launched in 2015 and was built completely custom for ATI's customers to use as an access point for certificates, internal check-in/out system, and providing Real Time calibration status. The goal of A-Trax was to give customers an online portal to eliminate the need for file cabinets full of certificates and have a centeralized location for all their quality records. With ATI's calibration process being handled in A-Trax, the barcode calibration stickers are also linked to each unique gage ID. Should an audit occur, an ATI customer can utilize a bar code scanner and Tablet PC or Laptop and access all calibration certificates & history in realtime with the auditor, eliminating the need to go back and pull records or request certificates from a calibration provider. 

The system is also used at ATI, every gage that enters the facility is scanned into A-Trax. If a customer has created a packing slip in the A-Trax system, the entry scan is compared against the customers record and alerts are sent if there is a discrepency. Using A-Trax internally also allows ATI to provide real-time turnaround dates for the last 7 davs vs. last 30 days. We're also able to track efficiency and time studies by calibration technician and gage type. 

 

All new Gages purchased through ATI are automatically calibrated and added to your Master Gage List.

All repairs are quoted prior to performing work.

 

ATI Laboratory Scope of Calibration

HAND GAGE CALIBRATION

  • AIR GAGES
 
  • INDICATOR CALIBRATORS
  • AIR GAGES (COLUMNS)
 
  • LEVELS
  • AIR GAGES (AMPLIFIERS)
 
  • MAGNA-MIKES (Hall Effect - Panametric, Elektro-Physik, Olympus, etc)
  • AIR GAGES (DIMENSIONAIR)
 
  • MAGNA-MIKE STANDARDS 
  • BORE GAGES (2 PT / 3 PT)
 
  • MICROMETERS - Bench
  • CALIPERS - Dial, Digital, Vernier
 
  • MICROMETERS - Depth  
  • CALIPERS (DEPTH) - Dial, Digital, Vernier
 
  • MICROMETERS - INSIDE: 
  • CALIPERS - Internal, External, Tube
 
  • MICROMETERS - OUTSIDE - Blade, Groove, Disc, Digital, Vernier:
  • CHAMFER CHEK GAGES
 
  • MICROMETERS - OUTSIDE - Multi Anvils:
  • COMBINATION SQUARES (Incl's Protractor, Ruler & Square)
 
  • MICROMETERS - PITCH
  • DUROMETERS
 
  • PI TAPES - Linear Check
  • DUROMETER HARDNESS BLOCKS - A, A Micro 
 
  • PROTRACTORS
  • DUROMETER HARDNESS BLOCKS - B, O, OO, D, D Micro(each)
 
  • RADIUS GAGES 
  • DEPTH GAGES - Dial, Digital, Vernier   
 
  • SNAP GAGES - DIAL                     
  • DEPTH MASTER / LEITECH 
 
  • SNAP GAGES - FIXED                    
  • FEELER GAGES 
 
  • STAGE MICROMETERS
  • HEIGHT GAGES - Dial, Digital, Vernier, Point
 
  • STEEL RULES  
  • FILM THICKNESS GAGES - Analog, Digital
 
  • STRAIGHT EDGES
  • FILM THICKNESS GAGES - Ultrasonic
 
  • SURFACE FINISH TESTER / PROFILOMETER
  • HOLTEST GAGES / BORE GAGES
 
  • SURFACE FINISH MASTERS 
  • INDICATORS - Dial, Digital
 
  • TAPE MEASURES
  • INDICATORS (TEST)
 
  • THICKNESS GAGES
  • INDICATORS (CO-AXIAL)
   

HARD GAGE CALIBRATION

  • 1-2-3 BLOCKS / 2-4-6 BLOCKS 
 
  • RINGS GAGES (PLAIN)
  • ANGLE BLOCKS 
 
  • SCREW LEAF TYPE PITCH GAGES 
  • ANGLE GAGES - Leaf Type 
 
  • SCREW TRI-ROLL GAGE
  • ANGLE PLATES 
 
  • SCREW HEAD GAGES - Greenslade / Universal Punch / Torx
  • ANGLES - Granite
 
  • SINE BARS 
  • BALLS / SPHERES 
 
  • SPACER BLOCKS 
  • BENCH CENTERS 
 
  • SPLINE PLUGS & RINGS
  • CONCENTRICITY GAGES / JO PLUGS
 
  • SQUARES - Cylindrical
  • CREST CHECK GAGES - RINGS & PLUGS 
 
  • SQUARES - Granite
  • DEPTH MIKEMASTER 
 
  • SQUARES - Steel: 
  • GAGE BLOCKS
 
  • TAPER GAGES - Rings & Plugs
  • GEAR WIRES 
 
  • TAPERED THICKNESS GAGES
  • HEIGHT RISER
 
  • THREAD PLUG GAGES - (TAPERED) BSPT, ISO, JIS
  • HEIGHT SET MASTERS
 
  • TAPERED THREAD RING GAGES - BSPT, ISO, JUS
  • KALMASTERS 
 
  • TAPERED THREAD PLUG GAGES - NPT, NPTF
  • LENGTH STANDARDS
 
  • TAPERED THREAD RING GAGES - NPT, NPTF
  • MASTER DISCS
 
  • THREAD & SETTING PLUGS - Standard UN Series & Metric
  • MICROHITE STANDARDS 
 
  • THREAD & SETTING  PLUGS - Non-Standard
  • MIC MASTERS 
 
  • THREAD & SETTING PLUGS - BSPP, ACME, Buttress, ISO, JIS
  • MIC MASTERS (PITCH)
 
  • THREAD RINGS - Non-Standard - UN Series & Metric
  • PARALLELS 
 
  • THREAD RINGS - UN Series & Metric - LH & Multi Thread
  • PIN GAGE SETS - Class Z, ZZ, Y
 
  • THREAD RINGS -BSPP, ACME, Buttress, ISO, JIS 
  • PIN GAGE SETS - Class X
 
  • THREAD RINGS - BSPP, ACME, Buttress, ISO, JIS 
  • PLUG GAGES (GO/NOGO) - Class X, XX, Air Gage Setting Plugs
 
  • THREAD WIRES 
  • PLUG / PIN (ALIGNMENT)  
 
  • TRU-POS LOCATORS 
  • RINGS - Chamfer-Chek Setting Masters
 
  • V-BLOCKS

GLASS SCALES / MASTERS

  • GRIDS (Up to 15 measurements)
 
  • RETICLES (Up to 10 measurements)
  • MAGNIFICATION CHECK SCALE (Up to 15 measurements)
 
  • SCALES (up to 12 measurements)
  • MAGNIFICATION CHECK TARGET (Up to 5 measurements)
 
  • SCALE LOUPES: (Up to 5 measurements)
  • OPTICAL FLATS
 
  • STAGE MICROMETERS (up to 10 measurements)
  • POCKET COMPARATORS (Up to 10 measurements)
 
  • ALL GLASS SCALES / MASTERS(Add'l Measurements each) 

ELECTRICAL / ELECTRONIC & VARIOUS METER CALIBRATION

  • ACCELEROMETERS:
 
  • LCR METERS
  • AMMETERS - Current
 
  • LIGHT METERS 
  • BRIDGES
 
  • MEGGERS / MEGOHM METERS
  • CAPACITANCE METERS
 
  • MULTIMETERS - DIGITAL (DMM)
  • CLAMP-ON METERS
 
  • OHM METERS
  • CONDUCTANCE METERS
 
  • OSCILLOSCOPES - 2 Channels
  • CONDUCTIVITY METERS
 
  • POWER METERS
  • CRIMPERS
 
  • POWER SUPPLIES:
  • CURRENT PROBES
 
  • REFRACTOMETERS
  • DATA LOGGERS
 
  • RADIOMETER 
  • DECADE RESISTORS
 
  • SCOPEMETERS
  • ELECTRIC PERMMETER
 
  • SHUNTS
  • FREQUENCY COUNTERS 
 
  • SIGNAL GENERATORS - Up to 100MHz
  • FUNCTION GENERATORS:
 
  • STRIP / CHART / X Y RECORDERS
  • GAGE AMPS
 
  • VOLT METERS
  • GAUSS METERS -  (-10 Gauss / +50 Gauss)
 
  • WATT METERS - Up to 11kW
  • GLOSS METER
 
  • WRIST STRAP TESTER
  • HYPOT TESTERS - (Up to 40kV)
   

VOLUME / VISCOSITY

  • PIPETTES 
 
  • ZAHN CUPS 
  • VOLUMETRIC / BOTTLE TOP DISPENSERS 
 
  • VISCOMETERS 

FORCE / WEIGHT / TORQUE / TENSION

  • DEADWEIGHT TESTERS
 
  • SCALES / BALANCES:
  • DYNAMOMETER GAGES
 
  • SPRING TESTERS (Both Force & Displacement)
  • FORCE GAGES 
 
  • TENSILE TESTERS: (Load, Speed & Deflection) 
  • LOAD CELLS
 
  • TENSIOMETERS - CABLE / BELT
  • MOISTURE ANALYZER 
 
  • TORQUE METER / TORQUE CHEKS:
  • PRECISION WEIGHTS
 
  • TORQUE TESTERS / TRANSDUCERS:
  • SAND RAMMERS
 
  • TORQUE WATCHES
  • SAND STRENGTH TESTERS
 
  • TORQUE WRENCHES:

FLOW / PRESSURE / VACUUM / VELOCITY

  • MELT FLOW INDEXER(4 Parameters)
 
  • FLOW
  • PRESSURE 
 
  • VACUUM (GAGE, TRANSDUCER)
(GAGES,BAROMETERS,MANOMETERS,TESTS,TRANSDUCERS)  
  • VELOCITY - Vane or Anemometer

TEMPERATURE / HUMIDITY

  • HUMIDITY GAGES
 
  • TEMPERATURE / HUMIDITY RECORDERS - Digital or Chart
  • HYGROMETERS
 
  • THERMOCOUPLE CALIBRATORS
  • OVENS 
 
  • THERMOHYGROMETERS
  • PYROMETERS
 
  • THERMOMETERS - Thermocouple
  • RTD PROBE, COEFFS
 
  • THERMOMETERS - Glass Mercury
  • RTD PROBES
 
  • THERMOMETERS - High Accuracy
  • SOLDER IRONS
 
  • THERMOMETERS - Rod / Dial
  • SOLDER POTS
 
  • THERMOMETERS - Rod / Digital
  • TEMPERATURE CONTROLLERS
 
  • THERMOMETERS - Infrared (IR)
  • TEMPERATURE RECORDERS - Digital or Chart
   

SPEED / TIME / SOUND / VIBRATION

  • SOUND LEVEL METERS
 
  • STROBOSCOPES
  • SPEED - Machine, Conveyer, etc 
 
  • TACHOMETERS
  • STOP WATCHES / TIMERS
 
  • VIBRATION AMP
 

To see our ISO / IEC 17025:2005 Laboratory Scope of Accreditation please click on the link below:

 

Note:If a type of equipment is not contained within our scope we can provide a NIST traceable certificate or use one of a number of labs that ATI is affiliated with.